Custom Mold Storage Roll Out Pallet Rack Injection Mold Racks With Hoist Crane
>>Description of injection mold racks
It’s suitable for storing different kinds of mould with each veneer separately drawable and height of each layer adjustable, saving storage and operation space. Save and take easily by assisting the movable manual chain hoist on the guide rail, load for each layer:1000-3000kgs.
Standard specification: H2000*L1000*d600*4 layers*4 cases.
This rack is consist of hoist frame and its front and rear rails, drawers, drawer rails, column pieces, front pillars, back pull, and hand hoists etc. Drawer racks are also called mould racks and are mainly used to store various moulds. The mould rack is equipped with manual movable carriage on the top and idler wheel rail on the bottom, and the sliding shelf panel could be freely pulled out when loading. Equipped with positioning safety device, whicj is reliable. Every component is connected by high-strength bolts. Modularity components can be assembled at any length.
Drawer rack, also called mold rack, which is mainly used to store mold products. It is possible to configure a mobile hoist (manual or power-driven) on the top, the roller pathways at the bottom of drawer make it free to pull with small force even after loading goods, and the additional positioning safety device makes it safer and more reliable.
>>Features of mold rack:
1, Die and Mould racks are very convenient to use die / mould storage devices with a built in lifting and lowering chain hoist.
2, The drawers are sturdy and can be pulled out and pushed back with the load.
3, In order to remove a die or mould from the rack simply put out the drawer on which the mould is placed.
4, Pull the monorail trolley and the chain hoist above the mould. Attach the hook of the hoist to the mould.
5, Lift the mould with the chain hoist about 2 inches above the drawer.
6, Push back the drawer into the rack and lower the mould to the ground or to a pallet lying in front of the rack.
7, The mould can now be moved to the machine with a pallet truck. Simple isn't it.
1.The post adopts 10#channel steel,diagonal brace of post is 25*25square merers.
2.Rack of backing plate is 50*50 angle iron,board size of backing plate is 2mm iron plate.
3.Sliding chute is made of folding 4mm iron plate.
4.Bearing is model 6403.
5.Bearing capacity:800-1000kg/backing plates.
6.With overhead crane bearing capacity 800kg.
• Roll out shelf racks are primarily used to store molds and dies.
• Roll out shelf racks are constructed of structural steel uprights.
• They include 3-4 roll out shelves and a top stationary shelf. 3 roll outs is most popular.
• Roll out shelves extend out 100% for full access
• Units must be securely anchored to the floor and level.
>> Specifications of Heavy Duty Pallet Racks:
||Injection mold rack, mold die racks
||RAL system (Uprights is blue , beam is orange , or customized )
||Q235 steel / Metal mmetallic
||500kgs to 5500kgs/layer
||ISO9001 , SGS AND CE CERTIFICATES
||Corrosion resistant, easy assemblily and height adjustable
About Liyuan Company:
Shenzhen Liyuan Industrial Equipment Co., Ltd. is specialized in the development, design, production, sales, installation and service of storage and storage equipment since 2007 . It has become a large-scale storage shelf manufacturer at home and abroad. And advanced companies in the development and production of intelligent industrial equipment. The company has passed ISO9001: 2000 quality management certification, ISO14001: 2004 environmental management system certification, OHSAS18001: 2007 safety management system certification. And has won the honorary title of China's quality and credit enterprise and the title of advanced intelligent and technological enterprise.
Pallet rack shelving Consulting and Design Services
We offer no obligation professional consultation and design. Allow our experienced staff to assist you in designing a storage system that best suits your particular needs.
We also offer:
• Professional CAD Drawings
• Stamped Engineered Drawings
Custom sizes and colors are also available.
Custom designed and built to meet your specific needs and requirements.
>>> After Sale Service
1. Professional engineer and application specialists respond to your requests efficiently;
2. Online via SKYPE MSN; Also through mail, voice phone message and fax if network is not accessible for customer;
3. Follow up the case, record the entire process, report complaint to QC department;
4. QC will find defect from which department ,who is in charge to identify responsibility
record customer respond,suggestion,requirement.
1. What makes you different with others?
1) Our Excellent Service
For a quick, no hassle quote just send email to us
We promise to reply with a price within 24 hours - sometimes even within the hour.
If you need an advice, just call our export office at 0086- 0755-29792161, we will answer your questions immediately.
2) Our quick manufacturing time
For Normal orders, we will promise to produce within 15 days.
As a manufacturer, we can guarantee the delivery time according to the formal contract.
3) Our Special Export Design
We pay very much attention to the export packages. We have plastic clips on the beams to protect the beams from surface damage in the transportation, We have got the whole uprights wrapped with transparent plastic film.
4) Our Export Experience
We are a manufacturer which wholesales storage racks in large quantity for over 10 more years.
2. How do you ensure your product and service quality?
A: All our processes strictly adhere to ISO-9001 procedures. Raw material inspect ---- First Production Confirm ---- Painting inspect ------ Full inspect before packing. And we have 3 years quality warranty against BL issue date.
3. How to install the racks?
A: You will get detailed install instruction for the rack you custom. If needed, we can provide our engineers to instruct your workers.
4. What is delivery time?
This depends on the product. Typically standard products are delivered within 20 days.
The delivery time of the special products is according to the time of setting up of the tooling.
5. What is the term of payment?
1) T/T payment.
6. If we find your bank account different as before, how should we respond?
A: Pls don’t send the payment and double check with us before arrange payment.
7. What you need to provide us before quotation?
A. Already with project design: Just send us, you will get quotation soon.
B. Without project design: Tell us detailed information, for example warehouse size, rack size, loading capacity, level…You will get free design.
8. If we don’t find what we need on your web, what should we do?
A: We could provide custom service, pls tell your request to us.
9. May I know the status of my order?
Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time
10. How to be the agent of your factory?
A: We are warmly welcome the agent from world country. Pls feel free to contact us for detailed discussion. You will be the solo agent in your country.
1) Our quick reply
For a quick quotation, just send email to us. We promise to reply with a price within 12 hours
2) Our short delivery time
For selective pallet racking orders, we will promise to produce within 15 days. As a manufactory we can essure the delivery time according to the formal contract.
3) Our special exporting packages.
We have plastic clips on the beams to protect the beams from surface damage in the transportation, We have got the whole uprights wrapped with transparent plastic film.